Foresight Nanotech Institute Logo

« Go Back

You are viewing
Foresight Archives

Image of nano

Study of carbon nanotube based nanoelectromechanical devices using continuum theories

M. Dequesnes, S.V. Rotkin, and N.R. Aluru*

Beckman Institute, University of Illinois at Urbana-Champaign,
Urbana, IL 61801 USA

This is an abstract for a presentation given at the
Ninth Foresight Conference on Molecular Nanotechnology.
There will be a link from here to the full article when it is available on the web.


Nanoelectromechanical Systems (NEMS) are sensors, actuators and devices with critical dimensions of the order of nanometers. Miniaturizing electromechanical systems a thousand times smaller than MEMS, where critical dimensions are micrometers, have tremendous engineering applications such as ultra-high data storage [1] or as supersensitive sensors. The design of NEMS can, however, be more challenging compared to the design of MEMS because of new physical phenomena encountered at the nanometer scale.

In this talk we will present results and discuss the development of continuum theories for simulation and design of carbon nanotube based NEMS. Carbon is an attractive material for NEMS because of its structural perfection, excellent electronic and mechanical properties and because of the rapid progress made in the fabrication process of carbon nanostructures. A common approach to simulate NEMS is to use molecular dynamics techniques. However, such approaches can be very expensive and may not be easily integrated in a design process. Hence, in this work we will demonstrate the fruitful use of continuum theories for analysis of NEMS.

We study the pull-in voltage characteristics of a nanotube cantilever over a ground electrode as a prototype NEM device. The pull-in voltage is defined as the potential difference between the cantilever tube and the ground electrode at which the cantilever tube becomes unstable and collapses onto the bottom electrode [2]. Predicting the range of instability is an important design issue for NEM switches as it defines their range of operability. Electromechanical analysis of a nanotube cantilever over a ground electrode has been performed by accounting for three coupled energy domains: elastostatic energy domain, electrostatic energy domain and the van der Waals energy domain. When a potential difference is created between the cantilever and the ground electrode, electrostatic charges are induced on the two conductors. The electrostatic charges give rise to an electrostatic pressure which deflects the cantilever. At nanoscale, the van der Waals forces also need to be taken into account to compute the equilibrium deflection of the nanocantilever structure. A self-consistent solution is obtained when the elastic, electrostatic and the van der Waals forces balance each other. Since there is very limited experimental data on pull-in voltages on NEMS, we will also present results comparing the accuracy of the continuum approach with the results obtained from molecular dynamics simulations.


  1. T. Rueckes et al., Science, 289, 94-97 (2000)
  2. G. Li and N.R. Aluru, Sensors & Actuators, to appear, 2001.

*Corresponding Address:
N.R. Aluru
Beckman Institute, University of Illinois at Urbana-Champaign
405 N. Mathews Avenue, Urbana, IL 61801 USA
phone: (217) 333-1180
fax: (217) 244-4333


Foresight Programs


Home About Foresight Blog News & Events Roadmap About Nanotechnology Resources Facebook Contact Privacy Policy

Foresight materials on the Web are ©1986–2018 Foresight Institute. All rights reserved. Legal Notices.

Web site developed by Stephan Spencer and Netconcepts; maintained by James B. Lewis Enterprises.