Foresight Nanotech Institute Logo

« Go Back

You are viewing
Foresight Archives

Image of nano

Ferrocene Intercalation into Hydrophobic Monolayers: Toward Light-Driven Molecular Assembly

Masahiro Muraokaa, Thomas W. Bella, Stephen L. Gillett*, b

aChemistry Dept., University of Nevada, Reno
bGeology Dept., University of Nevada, Reno
Reno, NV 89557 USA

This is an abstract for a presentation given at the
Ninth Foresight Conference on Molecular Nanotechnology.
There will be a link from here to the full article when it is available on the web.


The directed assembly of molecular building blocks into larger structures that remain organized at near-molecular scales is probably the single biggest barrier to developing nanotechnological systems. Approaches based on self-assembly probably hold the greatest promise in the short term, but modulating self-assembly processes to yield intricate 3D structures is a major challenge.

We have devised a simple system that suggests how light could be used to modulate and direct molecular assembly. Near-UV irradiation of an aqueous ethanolic solution of ferricenium cation ((C5H5)2Fe+, Fc+) containing suspended particles of a wide-bandgap semiconductor (e.g., TiO2) that has appropriate surface functionalization causes reduction of the Fc+ to ferrocene (dicyclopentadienyliron(II), Fc), with its concomittant absorption into the surface layer on the semiconductor. The change is striking visually; under illumination the blue ferricenium solution becomes colorless, while the white, suspended TiO2 particles become rusty brown due to immobilized Fc. Under appropriate conditions this system will spontaneously reverse in the dark from re-oxidation of the Fc to Fc+ by atmospheric O2.

The particles of TiO2 are rendered hydrophobic by reaction with octadecyltrichlorosilane (C18H37SiCl3, ODS), which coats the TiO2 with a hydrocarbon monolayer. Absorption of photons with energy greater than the TiO2 band gap (<~390 nm) generates electron-hole pairs. Charge separation occurs in the surface depletion layer, with the holes driven toward the surface. These holes are strong oxidizing agents and in aqueous solution will even oxidize water to hydrogen ions and O2:

(1) 2 h+ + H2O ==> 2 H+ + _ O2.

The electrons left behind by this reaction are moderately powerful reducing agents that can reduce solution species such as ferricenium:

(2) Fc+ (aq) + e- ==> Fc down arrow.

The ferrocene, being strongly hydrophobic, is extracted quantitatively into the hydrocarbon layer on the TiO2. After several hours in the dark under highly acidic conditions (pH < 1), the ferrocene will reoxidize and return to the solution as ferricenium.

This system exploits a wide disparity in polarity between the reduced and oxidized forms of a species to control its quantitative extraction out of solution, with the redox change mediated by a photoactive semiconductor. Although crude, it suggests how illumination could be used in molecular construction using redox-active species as building blocks. Moreover, functionalization of the redox species by appropriate side groups could result in cross-linking and covalent bond formation on precipitation. In addition, the photogenerated holes could conceivably also be exploited to drive molecular construction at the semiconductor surface, rather than be merely discarded into the solvent as in the present system.

Abstract in RTF format 5,814 bytes

*Corresponding Address:
Stephen L. Gillett
Geological Sciences/MS 172, University of Nevada,
Reno, NV 89557 USA
phone: 775-784-4760
fax: 775-784-1833


Foresight Programs


Home About Foresight Blog News & Events Roadmap About Nanotechnology Resources Facebook Contact Privacy Policy

Foresight materials on the Web are ©1986–2018 Foresight Institute. All rights reserved. Legal Notices.

Web site developed by Stephan Spencer and Netconcepts; maintained by James B. Lewis Enterprises.