Foresight Nanotech Institute Logo

« Go Back

You are viewing
Foresight Archives

Image of nano

Nano- and Microfabrication with Anodic Alumina as a Route to Nanodevices

Dmitri Routkevitch*, F. Howland Carpenter, Peter Mardilovich, and Alexander Govyadinov

Nanomaterials Research LLC,
Longmont, CO 80501 USA

This is an abstract for a presentation given at the
Ninth Foresight Conference on Molecular Nanotechnology.
There will be a link from here to the full article when it is available on the web.


Precision tailoring of the dimensions and chemistry of materials at the nanometer scale is only one prerequisite to the realization of the potential of nanotechnology. For many applications, even greater challenges are associated with positioning of nanomaterials in the desired location within the device, and their interfacing with the functional electronic and/or optical circuitry, all at affordable cost and high throughput. This is especially true when the device concept requires that all nanoscale elements are behaving coherently, and that the response of the array retains the characteristics of individual elements.

In this presentation we will overview our progress in addressing these challenges. The heart of the approach is based on templated nanofabrication and micromachining with one of the most fascinating self-organized nanoporous materials, anodic aluminum oxide (AAO). Uniform and parallel nanometer-scale pores of AAO could be used to host arrays of nanodots, nanowires or nanotubules. The pore diameter is tunable from 5 nm to several hundred nanometers, with the pore density in the range from 109 to 1011 cm-2. On the low end, the pore diameter approaches the carrier mean free path for selected metal and semiconductors, suggesting that quantum confinement effects might be realized. Pore diameter could be modulated along their length, opening additional opportunities for nanoelectronics. Nanotemplates could be prepared on Al, silicon and other substrates, as well as in a free-standing form. Various deposition techniques, such as electrodeposition, polymerization, sol-gel, and CVD could be used to prepare arrays of nanostructures. The templated approach was pioneered independently by several groups, and is successfully used today by an increasing number of researchers.

Resulting arrays of nanostructures encapsulated in AAO matrix could then be manipulated in many ways to integrate them into devices. The surface of AAO nanotemplates could be patterned prior to deposition to obtain domains of nanowires only in required areas. Furthermore, due to its intrinsic anisotropy, anodic alumina could be micromachined with great flexibility. This is a hybrid MEMS-type process, which combines design and processing features of both surface and bulk micromachining, and could be used to form 2- and 3-D microstructures and microdevices with integrated nanoarrays. We will present case studies for several types of such devices, including polarization-sensitive materials for radiation detectors, energy conversion materials, field emission cathodes and gas microsensors. A number of prototypes of these devices were produced, demonstrating performance enhancements in comparison with conventional devices.

*Corresponding Address:
Dmitri Routkevitch
Nanomaterials Research LLC
2021 Miller Drive, Longmont, CO 80501 USA
Phone: 720-494-8401 x115
Fax: 720-4948402


Foresight Programs


Home About Foresight Blog News & Events Roadmap About Nanotechnology Resources Facebook Contact Privacy Policy

Foresight materials on the Web are ©1986–2018 Foresight Institute. All rights reserved. Legal Notices.

Web site developed by Stephan Spencer and Netconcepts; maintained by James B. Lewis Enterprises.